CPC-THREAD Milling Machine Setup
Cutter
& Thread Specifications - Metric Dimensions
Machine: Machine Formula:
TMILL
#6 LEAD = 1.000000 X
LEAD
Cutter
Description:
5.0352 Minimum Tool
Width (mm)
1.1869 Point Width
(mm)
Thread
Specification System:
Normal Diametral Pitch (2.25/DP System)
Thread
Description:
2
Entry 50.8000 Major Dia.
(mm)
4.7625 Whole
Depth (mm) 2.1167 Addendum
(mm)
3.3249 Pitch
line 46.5667 Pitch Dia. (mm)
Thickness (mm) 41.2750 Minor Dia. (mm)
Axial Dimensions:
13.354708 Lead
(mm) 12.0000 DP
6.6773541
Pitch (mm) 2.117 Module
3.80390 Threads Per Inch
(TPI) 22.000 22.083 PA
Cutter Head
Setting:
5.2159 Helix
angle (Decimal Degrees)
5 Degrees 13
Minutes
Change Gear
Set Aux. Gear Set
Driver x
Driver Driver
------------------- --------
Driven x
Driven Driven
33 x 121
---------------- 1:1
71 x 107
Distance
between Change Gear Fixed shafts:
153.000 MM
Change Gear
Equivalent Module: 1.740
Over Pin
Measurements:
Pin Size
(mm) Backlash Allowance Measurement (mm)
3.5868 Minimum 0.000
MIN. 51.4981
Maximum 0.000 MAX.
51.4981
DISCLAIMER: Every
effort has been made to generate a complete and correct
machine setup. However, neither Community PC nor its
representatives
guarantee fitness of this information for any purpose to
which the
information may be applied. Further, neither Community PC
nor its
representatives assume liability, either in part or in
whole, for
any losses suffered by user or user's agent that may result
either
from application of this setup or from use of any
information
contained herin.