This screen displays a sample summary for No. 16 Spiral bevel generator that was produced using CPC-SB (Spread Blade) software. This is how your summary will look when you print it. Shown below are Tooth Dimensions, No. 16 gear and pinion finish settings, and Cutter specification.
Spiral Bevel Gear Summary No. 38747218 Date: 05/14/12
File Copy: Summary/sps87321.txt Comb. 8 X 37 DP 3.03800
PA 20 Spiral Angle 35 Cone Dist. 6.230 Face Width 1.654
No. 16 Generator Machine: mach2 File Name: sps87321.txt
------------------------------------------------------------------------
Mean Spiral Angle: 35D 0M No. 16 Method: Duplex Sp Blade
Shaft Angle: 90
GEAR PINION GEAR PINION
Addendum 0.169 0.413 Norm Chord Adden 0.451
Working Depth 0.582 Norm Chord Thick 0.628
Whole Depth 0.644 Backlash Allowed 0.012 / 0.022
Pitch Angle 77D 48M 12D 12M Dedendum 0.475 0.231
Face Angle 80D 36M 17D 15M Hand of Spiral RIGHT LEFT
Root Angle 72D 45M 9D 24M Cutting Method DUPLEX DUPLEX
Dedendum Angle 5D 3M 2D 48M Circular Thick 0.634
Outside Diameter 12.250 3.442
Cone Center Tooth bearing: 25.64 % (Approx)
to Crown 1.152 6.002
Cone Center
to Back _________ _________
GEAR PINION
Cutter Specifications: Cutter Specifications:
Cutter Diameter 12.000 Cutter Diameter 12.000
Point Width 0.147 Point Width 0.147
Cutter Number (Calc) 13.5000 Cutter Number (Calc) 13.5000
Cutter Number (Used) 17.5000 Cutter Number (Used) 17.5000
MACHINE SETTINGS - FINISHING:
GEAR: PINION:
Radial 5.16681 Radial 5.16681
Cradle Angle 67D 35M Cradle Angle 292D 25M
Sliding Base 0.14165 WITH Sliding Base 0.14165 WITH
Machine Root Angle 72D 45M Machine Root Angle 9D 24M
Vertical Offset: 4.91491 Above Vert. Offset: 4.91491 Below
Center Center
Tilt Angle 359D 20M Tilt Angle 0D 40M
Swivel Angle 327D 25M Swivel Angle 32D 35M
30-N Index 30/74x100/50 30-N Index 60/32x100/50
Nc/75 Ratio 0.5047 Ratio gears 33/58x55/62
DISCLAIMER:
Every effort has been made to generate a complete and correct machine
setup. However, CommunityPC does not guarantee fitness of this setup
for any purpose to which the setup may be applied. Further, CommunityPC
does not assume liability, either in part or in whole, for any losses
suffered by user or user's agent that may result from application of
this setup or of any information contained herein.