This screen displays a sample summary for No. 16 Spiral bevel generator that was produced using CPC-SB (Spread Blade) software. This is how your summary will look when you print it. Shown below are Tooth Dimensions, No. 16 gear and pinion finish settings, and Cutter specification.
Spiral Bevel Gear Summary No. 72989391 Date: 05/14/12
File Copy: Summary/sps16352.txt Comb. 5 X 37 DP 3.00000
PA 20 Spiral Angle 35 Cone Dist. 6.223 Face Width 2.074
No. 16 Generator Machine: mach2 File Name: sps16352.txt
------------------------------------------------------------------------
Mean Spiral Angle: 35D 0M No. 16 Method: Duplex Sp Blade
Shaft Angle: 90
GEAR PINION GEAR PINION
Addendum 0.177 0.432 Norm Chord Adden 0.492
Working Depth 0.609 Norm Chord Thick 0.618
Whole Depth 0.672 Backlash Allowed 0.015 / 0.025
Pitch Angle 82D 18M 7D 42M Dedendum 0.495 0.240
Face Angle 86D 0M 14D 0M Hand of Spiral RIGHT LEFT
Root Angle 76D 0M 4D 0M Cutting Method DUPLEX DUPLEX
Dedendum Angle 6D 18M 3D 42M Circular Thick 0.633
Outside Diameter 12.381 2.523
Cone Center Tooth bearing: 21.08 % (Approx)
to Crown 0.658 6.109
Cone Center
to Back _________ _________
GEAR PINION
Cutter Specifications: Cutter Specifications:
Cutter Diameter 12.500 Cutter Diameter 12.500
Point Width 0.141 Point Width 0.141
Cutter Number (Calc) 15.0000 Cutter Number (Calc) 15.0000
Cutter Number (Used) 0.0000 Cutter Number (Used) 0.0000
MACHINE SETTINGS - FINISHING:
GEAR: PINION:
Radial 5.31765 Radial 5.31765
Cradle Angle 74D 19M Cradle Angle 285D 41M
Sliding Base 0.10322 WITH Sliding Base 0.10322 WITH
Machine Root Angle 76D 0M Machine Root Angle 4D 0M
Vertical Offset: 5.11970 Above Vert. Offset: 5.11970 Below
Center Center
Tilt Angle 0D 0M Tilt Angle 0D 0M
Swivel Angle 0D 0M Swivel Angle 0D 0M
30-N Index 30/74x100/50 30-N Index 90/30x100/50
Nc/75 Ratio 0.4978 Ratio gears 36/55x54/71
DISCLAIMER:
Every effort has been made to generate a complete and correct machine
setup. However, CommunityPC does not guarantee fitness of this setup
for any purpose to which the setup may be applied. Further, CommunityPC
does not assume liability, either in part or in whole, for any losses
suffered by user or user's agent that may result from application of
this setup or of any information contained herein.