This page displays a sample setup for a selected non-differential gear hobbing machine using CPC-HOB software. This is how your setup will look when you print one out. Download the demo version from this website and try it out.
Company Name Here Date: 01/20/02
Gear Hobbing Machine Setup Setup No. 2.400025
----------------------------- MACHINE DATA ----------------------------
ID/Location: NON-DIF #1 Index: 15.000 Feed: 0.0750
------------------------- CUTTER/MACHINING DATA ------------------------
Hob Cutter Hand: R Starts: 1
Conven. Hobbing Machine Table Feed= 0.030 In/Rev
Gear Angle : ____20____Deg ____0_____Min
Hob cutter Angle: __________Deg __________Min (Subtract)
Set Table Angle: __________Deg __________Min
-------------------------- HELICAL GEAR DATA ---------------------------
TEETH = 55 STANDARD O.D.
Helix Angle= 20 Deg 0 Min RIGHT HAND HELIX
NDP = 12.000000
PITCH DIA. = 4.877 O.D. = 5.044
-------------------------------- NOTES ---------------------------------
----------------------------- CHANGE GEARS -----------------------------
DRIVER x DRIVER DRIVER x DRIVER
INDEX = --------------- FEED = ---------------
DRIVEN x DRIVEN DRIVEN x DRIVEN
32 x 40 20 x 24
INDEX = --------------- FEED = -----------------
67 x 70 28 x 43
------------------------------------------------------------------------
If this machine has a differential, then differential must be locked.
------------------------ (c) Community PC ----------------------------