This page displays a sample setup for a selected differential gear hobbing machine using CPC-HOB software. This is how your setup will look when you print one out. Download the demo version from this website and try it out.
Company Name Here Date: 01/20/02
Gear Hobbing Machine Setup Setup No. 2.400024
----------------------------- MACHINE DATA ----------------------------
ID/Location: DIF MAC #2 Index: 24.000 Feed: 0.0394
Differential Constant: 0.31639000 Differential Factor: 2.0
------------------------- CUTTER/MACHINING DATA ------------------------
Hob Cutter Hand: R Starts: 1
Conven. Hobbing Machine Table Feed= 0.030 In/Rev
Gear Angle : ____15____Deg ____0_____Min
Hob cutter Angle: __________Deg __________Min (Subtract)
Set Table Angle: __________Deg __________Min
-------------------------- HELICAL GEAR DATA ---------------------------
TEETH = 55 STANDARD O.D.
Helix Angle= 15 Deg 0 Min RIGHT HAND HELIX
NDP = 12.000000
PITCH DIA. = 4.745 O.D. = 4.912
-------------------------------- NOTES ---------------------------------
----------------------------- CHANGE GEARS -----------------------------
DRIVER x DRIVER DRIVER x DRIVER DRIVER
INDEX = ---------------- DIFF = --------------- FEED = -------
DRIVEN x DRIVEN DRIVEN x DRIVEN DRIVEN
48 x 72 57 x 57 48
INDEX = ---------- DIFF. = --------------- FEED = --------
45 x 88 57 x 58 62
------------------------------------------------------------------------
IMPORTANT ! This is a DIFFERENTIAL SETUP - Engage differential.
------------------------ (c) Community PC ----------------------------