Sample Summary for Gleason® No. 104 Straight Bevel Generator

Return to CPC-BV4 Features

This page displays a sample summary for Gleason's No. 104 Straight bevel generator that was produced using our CPC-BV4 software. This is how summaries will look when you print them out. Download the demo version and try it out.

 Coniflex Straight Bevel Gear Summary   10 x 15 T  DP   3.6640    Date: 07/19/05
 PA  24D  0M      Cone Distance  2.4601     Shaft Angle  90D  0M

   Diametral Pitch    3.6640                    Machine Loc: A-123
   Face Width         0.8200                    Type:    No. 104
   Working Depth       0.546
   Whole Depth         0.597                    System:  AGMA 208.02
   Outer Cone Dist    2.4601

                     Pinion     Gear                      Pinion      Gear
   Teeth                10        15    P Apex To Crown   1.857      1.195
   Addendum          0.342     0.204    Pitch Angle       33D 41M    56D 19M
   Dedendum          0.255     0.393    Face Angle        42D 46M    62D 14M
   Pitch Diameter    2.7293    4.0939   Root Angle        27D 46M    47D 14M
   Circular Thick.   0.4958    0.3616   Tooth Angle        8D 25M     8D 17M
   Dedendum Angle   5D 55M    9D  5M  Chordal Addendum      0.361      0.208
   Outside Diameter  3.298     4.320  Chordal Thick.(Max)  0.4851     0.3531
                                                    (Min)  0.4836     0.3516

 CUTTER SPECS:     Pinion         Gear       Backlash (Min-Max) 0.008 - 0.011
   Cutter Spec.  G104E 90T-C   G104E110T-D
   Blade PA        21D 30M       20D  0M     Pattern Length     0.340
   Blade Pt Width   0.090         0.110      Profile Factor     0.0000
   Finished Slot Widths:
      Large End     0.159         0.197      Minimum PA (To avoid
      Small End     0.107         0.133                 undercut)  23D 55M

 MACHINE SETTINGS:            Pinion            Gear
   Cutter Cone Distance         2.050            2.050
   Space Angle                 3D 20M           3D 45M
   Cutter Offset: Upper        0.493            0.494
                  Lower        0.493            0.494
   Sliding Base              .9828 -DR        .9828 -DR
   Machine Root Angle         27D 46M          47D 14M
   Cradle Test Roll           20D  0M          20D  0M
   Work Test Roll             36D 42M          24D 43M
   Minimum Cradle Roll        45D 45M          40D 52M

                             75 x  54        100 x  36
   Index Gears             -----------      -----------
                             30 x  60         30 x  80

   Selection Gears          G10E-487         G10E-487
                              Nc/25            Nc/25
   Roll Decimal Ratio        0.734149         0.741468

                            51  x  62        32  x  70
   Ratio Roll Gears        -----------      -----------
                            59  x  73        53  x  57

 DISCLAIMER: Every effort has been made to generate a complete and correct
 machine setup. However, Community PC does not guarantee fitness of this setup
 for any purpose to which the setup may be applied. Further, Community PC does
 not assume liability, either in part or in whole, for any losses suffered by
 user or user's agent that may result from application of this setup or from
 any information contained herein.