Sample Summary for Gleason® No. 16 Straight Bevel Generator

Return to CPC-BV1 Features


This page displays a sample summary for Gleason's No. 16 Straight bevel generator that was produced using our CPC-BV1 software. This is how summaries will look when you print them out. Download the demo version from this website and try it out.


Spec Jobbing Method No. 62341209 31 X 42 T DP 5.1690 DATE: 08/03/99
PA 20D 0M Spiral Angle 34D 0M Cone Distance 5.0495 Face Width 1.7500
Machine Location  Index 1.5 Type 16 No. 1  Shaft Angle 90D 0M
      System AGMA 208.02

------------------------------------------------------------------------

SPUR BEVEL GEAR SPECIFICATIONS:
    Pinion Gear
Working Depth 0.3290   Chord Addendum 0.200 0.130 (outer)
Whole Depth 0.3650   Chord Thickness 0.334 0.274 (outer)
Diametral Pitch 5.1690   Hand LEFT RIGHT

SPUR BEVEL GEAR DIMENSIONS:
  Pinion Gear     Pinion Gear
Teeth 31 42  P Apex To Crown 3.945 2.894
Addendum 0.199 0.130  Pitch Angle 36D 26M 53D 34M
Dedendum 0.166 0.235  Face Angle 39D 6M 55D 27M
Pitch Diameter 5.9973 8.1254  Root Angle 34D 33M 50D 54M
Outside Diameter 6.317 8.280  Tooth Angle 1D 49M 1D 42M
Circular Thick. 0.3340 0.2738  Dedendum Angle 1D 53M 2D 40M
Backlash   (Min) 0.006    Chordal Thick. (Max) 0.3308 0.2707
(Max) 0.008     (Min) 0.3298 0.2697

Minimum PA (To avoid undercut) 12D 20M

GEAR
 
PINION
CUTTER SPECS: Rough Finish Rough Finish
No. & PA 20.0 - 120' #12 - 20.0D 20.0 - 60' #30 - 20.0D
Diameter 9.0 9.0 9.0 9.0
Point Width 0.068 0.100 0.050 0.050
Outside Blade Angle
Inside Blade Angle
Blade Letter

Max Limit Pinion Cutter Point Width: 0.050

No. 16 ROUGHING SETTINGS No. 16 FINISHING SETTINGS
  GEAR PINION GEAR PINION OB PINION IB
Radial 4.083 4.083 3.886 3.689 3.713
Sliding Base ADV 0.000 ADV 0.000 WITH 0.000 WITH 0.252 WITH 0.224
Blank Position STD STD ADV 0.000 ADV 0.028 WITH 0.028
Blank Offset 0 0 0 0 0
Cradle Angle 66D 2M 293D 58M 68D 48M 305D 15M
Tilt Angle 0 0 1D 5M 2D 21M
Swivel Angle - - 44D 14M 20D 45M
Mach. Root A 50D 54M 34D 33M 49D 37M 34D 33M
Cr. Test Roll 30 20 30 20
Wrk Test Roll 37D 15M 33D 40M 37D 15M 33D 40M
Nc75 Ratio Grs 40/41 x 62/87 40/46 x 44/55 40/41 x 62/87 40/46 x 44/55

  Finished Pinion   Finished Toplands:
  Slot Widths: GEAR PINION
Large End 0.082 0.099 0.108
Mid-Face 0.081 0.099 0.111
Small End 0.061 0.081 0.115