This page is designed for webmasters who are requesting a link from Meshing with Gears©. Meshing With Gears fully supports exchanging links of RECIPROCAL VALUE as an effective way to assist visitors who could benefit from other websites offering valuable manufacturing resources.
NOTE: Please review the rules governing our link exchange program at the bottom this page.
In order to simplify linking to our website, Meshing With Gears provides the examples shown below for cut-and-paste inclusion on your link referral page. If you are using Microsoft's Internet Explorer© or Netscape's Navigator© browser simply right click anywhere on the page and selectView Source. Your editor will appear with the HTML script text. Find one of the examples that you want to use. Each example is bounded by comment lines as illustrated here:
<! ¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ begin link sample ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯¯ ¯¯ >
copy all text exactly as it appears between comment lines to your clipboard.
Do NOT copy the <! ¯¯¯¯ ¯¯¯¯ or ¯¯¯¯ ¯¯¯¯ > lines
<! ¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ end link sample ¯¯¯¯ ¯¯¯¯ ¯¯¯¯ ¯¯¯¯¯ ¯¯¯¯¯ ¯¯>
Next, using your HTML page editor, open your website's HTML page where you want to add this link, and paste the Meshing with Gears HTML link script there.
These components are preapproved with the following modifications:
These components may be rearranged, word wrapped, indented, and included in tabular format. Font type may be changed to suit the format of your host link page. Font size 2 or 3 is recommended but should not be smaller than 2. If your link page theme does not include graphics, the non-graphical examples below are recommended.
The following modifications are not acceptable without prior written approval:
If it is necessary to use reduced or modified text in our link back, please E-mail the necessary changes to:
If, for any reason and at any time, Meshing With Gears feels that either link in the exchange is inappropriate to the goals and purposes of Meshing with Gears, Meshing With Gears reserves the right to remove our link to your website and to request that you remove your website's link to Meshing with Gears.
Please to request your website's link on Meshing with Gears©. We will review the request, and if we deem the link appropriate, we will try to create a link to your website using your preferences where possible.
First Example, Table formatting, Side by SideFont Size = 3:
|
Visit Meshing with Gears ©. Get spur and spiral bevel, helical, and thread mill setup software. Enjoy free listing for your company, free BuySell page, extensive gear FAQ, and a busy gear topic forum. If you manufacture gears this site is a must visit. |
Second Example, Table Formatting, stacked - Font Size = 2:
|
|
| Get spur and spiral bevel, gear hobbing, and thread milling setup software. Free BuySell page and Company Profile listing. If manufacturing gears is important to you this site is a must visit. |
Third Example, Table Formatted, Stacked and Aligned:
|
|
| Get spur and spiral bevel, gear hobbing, and thread milling setup software. Free BuySell page and Company Profile listing. FAQ page and busy discussion forum. |
Fourth Example, No Graphic, Bullet, Wrap to Page Width, Text Link:
Fifth Example, No Graphic, No Bullet, Wrap to Page Width, Text Link:
Meshing with Gears © Supplies PC software for spur and spiral bevel gear, gear hobbing,and thread milling machines. Free Buy/Sell page, Gear FAQ and a busy gear topic forum. This site is a significant resource for any gear manufacturer.
This ends the list of approved links to Meshing With Gears website.
WE RESERVE THE RIGHT TO MANAGE OUR LINK PROGRAM AS FOLLOWS:
First and foremost we seek out and link to resources with good gear manufacturing related content. There is no "bad" gear manufacturing related content, just some so-called Search Engine Optimization (SEO) practices that have perverted the usefulness of linking. We are trying to take the high ground through all the SEO hype by applying these simple rules:
(1) We do not swap links with link farms or sites with mega-link collections. These do not serve any
purpose to our visitors! We hope and expect that such distortions to web searching will become obsolete someday.
(2) We reserve the right to selectively link only to those websites with gear-related content. We consider it an honor to link to
sites with gear-related content even if they don't link back to us!
(3) Sites of interest to the gearing community may be placed on our "Other Resources" page. From experience, there are many
companies not directly related to gearing that are important to our community, so each link request is considered.
(4) Sites that intentionally do not participate in reciprocal linking will not likely improve their search engine ranking here, even though we
include those sites based on good content. Content is priority one!
(5) We link only to the home page, or to quality content in gear-related articles. No link backs below a 2nd level page.
No two-way or three-way linking. No exceptions.
(6) We place a "nofollow" attribute in links to interesting sites without reciprocal link capability.
Please note: "Nofollow" links and links located on our "Other Resources" page do not participate in Search Engine page ranking. This has no effect on our visitors who choose to follow these links.
As SEO techniques change, these observances will likely change too, but we will always link to any site with good gear-related content even if that site cannot link back to us. Meshing With Gears deeply appreciates its link partners and will always seek new link partners who can provide our visitors with quality resources.
If you have questions please contact the